平面安装PVC, 黄铜或 316 不锈钢1 ~ 3 个探头可固定1至3个探头，适合大气压下工作。开口储罐或封闭容器顶部平面安装。配套3R刚性或3 W悬挂式电极使用.CSA 认证 典型应用: 敞口储罐封闭容器水腐蚀性稀释液
Series DSSR DIN/Panel Mountable Solid State Relay features an internal heat sink, bistable clips for DIN rail or panel mounting and an LED indicator light. It is a completely solid state relay - it has NO moving parts. The DSSR provides reliable switching and long-life operation in applications where high inrush currents or induced currents can affect mechanical state relay operation. The compact housing also minimizes panel space.
The MTL7706/7787 is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.
产品介绍： 由于斯派莎克SM双金属式疏水阀排放低于饱和温度的冷凝水，能利用冷凝水中的部分显热，因此对于能充分利用蒸汽显热的设备而言，该类疏水阀是理想的选择。双金属疏水阀是所有的热静力疏水阀中*坚固的，可耐水锤和腐蚀。按照本公司关于不同的应用场合选择不同类型的疏水阀原则，斯派莎克的双金属疏水阀专门设计成只适合一种应用工况，即积水可以接受甚至是有利的特殊应用工况。斯派莎克双金属疏水阀具有如下的特点：型号众多，适应广泛的压力和负载范围。灵敏的感应，能避免较大感温元件的热惯性。在低于饱和温度下排放冷凝水，能减少二次蒸汽的损失。耐水锤、腐蚀性冷凝水和冰冻。根据不同的容量采用独特结构的多爪型或圆片和弹簧组合的双金属元件。能自由排放空气，内置不锈钢过滤器。
The Series DCS/RDCS Springless Dust Collection Valves are ideal for use with the Series DCT1000 and Series DCT500 duct collection timer boards. A springless design offers not only durability, but also reliability for an exceptional cleaning pulse. Both the Series DCS and RDCS have the option for either coupling or NPT connections. The coupling connection allows for a quick and simple installation. Only the stub pipe and blowtube need to be cleaned and deburred before the valve is fit into position. The “T” Series DCS has female threaded connections and the “C” Series DCS has a coupling connection. Both the “T” and “C” versions have a 90° angle between the inlet and outlet: the most suitable configuration for pulse valve applications. The valves are offered in both integrated and remote coil configurations.
MOPD（**开阀压差）: 1000 psi (69 bar)CV 值范围: 0.019 至 0.300功耗：6 WGems A 系列电磁阀可为Cv 值在0.019 至0.300 之间的所有应用提供高适应性的解决方案。这种性能可靠的两通和三通电磁阀采用不锈钢阀体，可耐受大多数酸碱溶液和恶劣的工作环境。在需要特定惰性稳定或要求严格的环境下，亦可根据需要选用从聚丙烯到Delrin® 等特殊材质。A 系列电磁阀可提供各种接口配置、孔径和材料组合方案，是一种功能极为灵活的产品，可满足您大多数应用需求。典型应用: 不锈钢阀体： 医疗设备实验室设备 食品加工设备 黄铜阀体： 工业应用汽车工业 供水系统
